EasyManua.ls Logo

Singer Professional 5 - Elastic Foot Operation

Singer Professional 5
129 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Additional Presser Feet page 3
ELASTIC FOOT
The Elastic Foot is used for inserting elastic into a seam. It can be used for
swimwear, lingerie and other sewing projects.
Machine Preparation
• Differential Feed: Set to “N”
• Needles: Use both the right & left needle for wider elastic, right needle for narrow
• elastic
• Upper Knife: Engaged
• Stitch Length: Set to 3 or 4
• Foot: Attach (snap-on) elastic foot
Sewing Instructions
• Set the needles at the highest position
• Raise the presser foot
• Loosen screw (2), which will allow the brake (1) to be raised
• Insert the elastic tape (3) into the foot under the brake and run it through to the back of the foot
• Tighten screw (2); the more you tighten, the more pressure will be added to the brake (1),
causing the elastic to stretch even more
• Lay the seam under the presser foot, lining up the fabric to sew a 5/8” seam
• Lower the presser foot and begin to sew
• When seam is complete, continue to sew over the elastic for approximately 1 to 2 inches. Cut
elastic and remove from machine.