Singer S800 - Helpful Messages; Troubleshooting Common Operations

32
HELPFUL MESSAGES
If an incorrect operation is made, a helpful message will be displayed. When
a helpful message is displayed, fix the problem following the instructions
below.
Bobbin winder is moved to right (operating position) during sewing.
Î

Check bobbin winder and move it to left.
Buttonhole lever is not lowered or raised.
Î

Lower buttonhole lever when sewing buttonholes.
Î

Raise buttonhole lever when sewing stitch patterns.
Foot control plug is pulled out, while operating foot control.
Î

Push in foot control plug.
0DFKLQHLV ORFNHG XS GXH WR WKUHDG HQWDQJOHGZLWK EREELQ FDVH RU URWDWLRQ
interrupted forcibly.
Î

Turn off power switch and eliminate the problem that caused the machine
to stop.
Reverse/tacking stitch button is pushed, while buttonhole stitch is selected.
Î

Tacking stitch is made automatically after buttonhole stitch is completed.
It is not necessary to push the reverse/tacking stitch button.
Bobbin winder is in operation.
Î

0RYHEREELQZLQGHUWROHIWZKHQLWLVQRWXVHG