6
Attaching Purchased Piping
Attach pre-packaged piping to add a bold finish to home decorating
projects, crafts or clothing.
Machine Set-up:
Stitch: Straight Stitch
Stitch Width: 0, no width
Stitch Length: 3-4
Presser Foot: Zipper Foot
Materials
:
(2) 3” x 6” pieces of home décor fabric
7” pre-packaged piping
Procedure
:
Place fabric right sides together.
Place piping between the fabrics, matching the piping’s raw edge with
the fabric’s raw edges.
On the wrong side of the fabric, sew a straight stitch close to the
piping.
Note: The Zipper Foot can be attached right or left, allowing for
the piping to be inserted from either side.
Piping Raw Edges
Fabric Raw Edges Stitching Line
To Next Page
Loading...
Need help?
General
