11
Lace Insertion
Insert lace into a special occasion garment or a home decorating project
to create a beautiful heirloom keepsake.
Machine Set-Up:
Stitch: Zigzag stitch
Stitch Width: 2-3
Stitch Length: 1
Presser Foot: Standard Foot or Satin
Foot*
Needle Position Center
Materials:
5” x 3” of batiste
6” strip of lace
60-80 weight fine cotton thread
Procedure:
Spray starch and iron the lace and batiste.
Center the lace right side up, lengthwise on batiste.
Stitch lace to fabric by sewing a zigzag stitch down both edges of the
lace. Try to just clear the heading on the lace.
*Depending on model, the Satin Foot might be optional. Check the instruction manual.