Singer SG2740 - Troubleshooting Guide; Iron Not Heating Issues; Steam Output Problems; Water Leakage Solutions

10
ENGLISH
TROUBLE-SHOOTING OF THE STEAM IRON
If your Steam Iron does not perform well, please check the following points.
Problem Possible Cause Solution
The iron is plugged in but the
soleplate is cold
Socket doesn’t work Plug-in other socket
There is a connection problem Check if the plug is connected
to the wall socket properly
The temperature setting has
been set to MIN
Set the temperature setting to
the required temperature
No Steam comes out There may not be enough
water in the water tank
Fill the water tank; see “HOW
TO FILL THE WATER”
Steam Knob is in Steam Off
position
Turn the Steam Control Knob
to Steam ON position
No Steam Burst comes out There may not be enough
water in the water tank
Fill the water tank, see “HOW
TO FILL THE WATER”
First time usage Press the Burst of Steam But-
ton few times until the Steam
burst comes out
No Spray mist comes out There may not be enough
water in the water tank
Fill the water tank, see “HOW
TO FILL THE WATER”
First time usage Press the Spray Button few
times until the spray mist
comes out
Soleplate's heat is not enough Incorrect Temperature setting Turn the Temperature Dial with
respect to the garment
Water leakage from soleplate Steam Iron's heat is not
enough to produce the steam
Set Temperature Dial to Max
position with
indication
Steam control knob is in 'ON'
position while refi lling the
water tank
Turn the steam control knob to
(steam off) position before
refi lling the water tank
Damaged textile Over heat Follow the garment guide or
test on the inside of the hem of
the garment
Flakes and impurities come
out from the soleplate holes
during ironing
You have been using hard
water, which has caused scale
fl akes to develop inside the
soleplate
Perform SELF-CLEANING
once or more times.
See “SELF-CLEANING”.