9
ENGLISH
B. Build-in Anti-scale System
The build-in anti-scale cartridge is designed to reduce the build-up of lime scale which occurs
during steam ironing. This will prolong the working life of your iron.
Note: The anti-scale cartridge will not completely stop the natural process of lime scale build-
up.
AUTO SHUT-OFF FEATURES:
The Auto shut-off feature will operate automatically when the iron is connected to a mains sup-
ply outlet but immobile for a period of time.
AUTO SHUT-OFF IN HORIZONTAL
1. The iron will switch off automatically at around 30 seconds if the iron is immobile in the iron-
ing position (horizontal).
2. Pilot light blinks, indicating the iron is in Auto-Off mode.
3. To use again, simply move the iron it will be ON.
AUTO-SHUT OFF IN VERTICAL
1. The iron will switch off automatically at around 8 minutes if the iron is left on its heel rest
position (vertically).
2. Pilot light blinks, indicating the iron is in Auto-Off mode
3. To use again, simply move the iron it will be ON.
Note: The iron will take about 60 seconds to reach its previous soleplate temperature.
DRAINING THE WATER
1. Disconnect the iron from the mains supply outlet.
2. Move the Steam control knob to position.
3. Open the water inlet cover and remove water from water tank as
Fig 12.
4. Shake it to remove any remaining water out of fi lling hole.
5. When the iron gets cool completely, store it vertically in a safe
place.
CLEANING THE IRON
1. Disconnect the iron from the mains supply outlet.
2. Use a damped cloth or non-scratching cleaner to remove any deposits on the sole plate or
the Iron body.
Note:
1. Never use sharp or rough objects to remove the deposits on the sole plate.
2. Never use any abrasive, vinegar or descaling agents to clean the iron.
(Fig. 12)
To Next Page
Loading...
