Singer SG2740 - Key Iron Features; Anti-Drip System Explanation; Double Anti-Scale System; Replaceable Anti-Scale Cartridge

8
ENGLISH
ANTI-DRIP
1. Anti-drip system is designed to automatically prevent the wa-
ter escaping from the soleplate when the iron is too cold.
2. During use, the anti-drip system may emit a loud clicking
sound, particularly during heat-up or whilst cooling down. This
is perfectly normal and indicates that the system is functioning
correctly.
DOUBLE ANTI-SCALE SYSTEM
This ιron has the double anti-scale system to prolong the working life of Iron.
A. Replaceable anti-scale system:
This one is placed at water inlet hole, and it can be replaceable
1. To take out this anti-scale, just turn it 90 degrees in anti-clockwise direction and pull up as in
Figure – 8 & 9.
2. To fi x again, just place it in position and turn it 90 degrees in clockwise direction as in Figure
10 -11
(Fig. 7)
(Fig. 8) (Fig. 9)
(Fig. 10) (Fig. 11)