EasyManua.ls Logo

Singer SG50 - USING THE APPLIANCE; HOW TO SET THE TEMPERATURE; STEAM IRONING; VERTICAL IRONING

Singer SG50
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
ENGLISH
USING THE APPLIANCE
HOW TO SET THE TEMPERATURE
Plug in the supply cord (tube) to a grounded wall outlet and set the temperature adjustment
knob to a degree suitable for the clothes you will iron. To increase the temperature level, turn
the dial clockwise.
• Check the labels of clothes to verify the proper ironing temperature setting.
If you are not sure about the type of a particular clothe, do a test ironing on an invisible part of
the garment to nd out the ideal temperature setting.
To avoid silk or other synthetic clothes to develop bright stains during ironing, iron their reverse
surfaces.
When using the iron for the rst time, pass the iron on an old cloth a couple of times.
STEAM IRONING
- Check the labels of clothes before beginning to iron and make sure that the fabric is suitable
to be ironed with steam.
• Use normal tap water.
• Loosen the boiler cap (11) and pour approximately 650ml of water into the boiler.
After having tightened the boiler cap (11), place the plug into the socket.
Turn on the appliance using the on/off switch (13). The luminous switch will turn on indicating
that the iron and the steam control panel are in operation.
Select the desired temperature by turning the temperature adjustment knob (7). The coloured
section of the temperature adjustment knob indicates when steam can be produced.
When the “steam ready” light (14) turns on, the iron is ready for use. The light will turn on and
off during use. This is normal.
For extra steam press the extra steam button (2). If you want continuous steam emission, keep
the button pressed and slide the steam lock button (3) backwards.
To modify the quantity of steam emitted while ironing, turn the temperature adjustment knob
(7). Turn the knob clockwise to increase steam emission
VERTICAL IRONING
Set the temperature adjustment knob (7) at the max position (points”…”).
Hang the item of clothing on a hanger.
Pass the iron downwards, pressing the extra steam button (2).
Note:
1. Do not apply steam on any clothes or fabrics that are being worn by human or pets.
Temperature of steam is very high.
2. Maintain a distance of a few centimeters from delicate fabric (synthetics, silk, velvet, etc.).
Otherwise the fabric could be damaged.

Related product manuals