10
INSTALLATION
If the water drain hose
needs to be extended, its
length should not exceed
3 meters, otherwise it will
affect the water discharging
time
Do not bend the water drain
hose and place it under the
washer.
The placed height of the water
drain hose shall not exceed
15 cm.
Completely sleeve the
drain hose over the
sewer.
Fix and tighten it with a
hoop. (As shown in the
gure)
Placement of water drain hose
Installation of drain hose
LEVELLING
If the washer is not levelled with the ground, it makes the machine vibrate more and result
it being out of order. So, make sure that the washer is levelled
properly.
ENSURE THAT THE MACHINE IS PROPERLY LEVELLED BY
CHECKING THE POSITION OF THE WASHING TUB.
Open the lid of the machine, pour water into the tub up to the
level just below the pulsator, and adjust the legs so that the
pulsator is positioned at the center of the water as shown in the
gure.
Place the machine more than 10 cm away from the wall.
Adjust the legs on feet for levelling.
Water
To Next Page
Loading...
Need help?
General
