Singer SP-550 - Page 5

ENGLISH – 5
FEATURES & ACCESSORIES DESCRIPTIONS
1. Handle – raises and lowers the Pressing Plate. Also used to carry the unit.
2. Steam Burst Buttons – located on either side of the Handle and produces a burst of steam
when pressed.
3. Water Tank – holds the water needed to produce steam.
4. Ironing Board – padded surface onto which fabric is placed for pressing.
5. Pressing Plate – large temperature-controlled surface that heats and presses fabric.
6. Ironing Board Cover – protects the Ironing Board, is removable and can be washed.
7. Temperature Control Dial – used to select a desired temperature. Turn dial to the fabric
setting that matches the material you are pressing.
8. Locking Knob – locks the Pressing Plate and Ironing Board together.
9a. On/Off Switch – activates and deactivates the unit.
9b. Power Indicator Light – illuminates when On/Off Switch is in “On” (|) position.
10. Pressing Indicator Light – illuminates while unit is heating to selected temperature. When
light goes off, Steam Press is ready for use.
11. Steam Ready Indicator Light – illuminates when unit is ready to produce steam for use.
12. Measuring Cup – used to assist in easily lling the Water Tank (best with distilled water).
13. Spray Bottle – used to moisten fabric before pressing stubborn wrinkles and heavier
fabrics.
14. Pressing Cushion – fabric-covered pad used for pressing gathered or contoured areas
such as sleeves, darts, collars or yokes.