Singer TS - THREADING PATH C continued...; PREPARATION FOR FORMING THREAD CHAIN; FORMING THREAD CHAIN

TS+ TS380+
Table of Contents Previous Page | Next Page
17
THREADING PATH C continued...
• Thread needle from front to back.
• Draw thread to left.
PREPARATION
FOR FORMING THREAD CHAIN
• Lower needle clamp body to lowest position.
• Collect the three threaded threads and
place them under presser foot.
FORMING THREAD CHAIN
• Hold thread ends at 30 to needle. (towards
left rear corner).
• Turn handwheel about 8 times to form
thread chain.
• If chain will not form check threading.
• After producing chain, start to sew on your
fabric.