Singer TS - MAIN PARTS

TS+ TS380+
Table of Contents Previous Page | Next Page
3
MAIN PARTS
1. Thread guide holder
2. Thread guide helps to ensure a smooth
flow of thread.
3. Spool pin and cap holds top thread
supply and prevents thread tangling.
4. Tension dial controls thread tension. Do
not adjust these dials until threading is
checked.
5. AC adaptor (9V 650mA) supplies power
for your machine.
6. Foot switch runs machine.
7. Sewing speed selector Low and high
8. Handwheel provides a means for raising
or lowering the needle.
9. Front cover, covers mechanism.
Threading diagram is displayed on right
side of machine when the cover is
removed
10. Accessory box.