Singer XL-420 User Manual

52
(A) (B)
(C)
(C)
(C)
(C)
Tab A
Butée A
Lengüeta A
Tab B
Languette B
Lengüeta B
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
BUTTONHOLES
USING BUTTONHOLE FOOT
1. Insert a button in between tab A and tab B.
2. Buttonholes can be sewn to match the size of the button.
It is helpful to remove the extension table when sewing a
EXWWRQKROHWR NHHS WKH IRRW IURPYLEUDWLQJZKHQPRYLQJ
across the table.
PROCEDURE
* Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer should also be used.
 0DNHDSUDFWLFHEXWWRQKROHRQDVFUDSRIWKHIDEULFZLWKWKH
selected button.
1. Select one buttonhole pattern.
2. Replace the presser foot with the buttonhole foot. (Refer to
“Changing presser foot” on page 22 - 23.)
3. Insert the button into the buttonhole foot. (Refer to “Using
buttonhole foot” above.)
4. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).

Singer XL-420 Specifications

General

Type	Computerized Sewing and Embroidery Machine
Built-in Stitches	200
Embroidery Designs	125
Buttonhole Styles	10
Needle Threader	Automatic
LCD Screen	Yes
Sewing Speed	850 stitches per minute
Connectivity	USB
Stitch Width	7mm
Stitch Length	5mm
Voltage	110V
Warranty	25-Year Limited Warranty
Bobbin System	Drop-in