Singer XL-580 User Manual

52
(A) (B)
(C)
(C)
(C)
(C)
Tab A
Butée A
Lengüeta A
Tab B
Languette B
Lengüeta B
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
BUTTONHOLES
USING BUTTONHOLE FOOT
1. Insert a button in between tab A and tab B.
2. Buttonholes can be sewn to match the size of the button.
PROCEDURE
* Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer should also be used.
* Make a practice buttonhole on a scrap of the fabric with the
selected button.
1. Select one buttonhole pattern.
2. Replace the presser foot with the buttonhole foot. (Refer to
“Changing presser foot” on page 22 - 23.)
3. Insert the button into the buttonhole foot. (Refer to “Using
buttonhole foot” above.)
4. Set the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
It is helpful to remove the extension table when sewing a
buttonhole, to keep the foot from vibrating when moving
across the table.
94 96 9895 97 99

Singer XL-580 Specifications

General

Brand	Singer
Model	XL-580
Category	Sewing Machine
Language	English