SINMAG SM-402 Mixer
W & P Reedy Pty Ltd 02-9533-9522
www.wpreedy.com.au
Page 13
Risk Assessment:
The following risk assessment covers the reasonably foreseeable hazards to health and
safety arising from the SINMAG SM-402 mixer and from systems of work associated with
this machine.
Hazzard identified Existing controls Consequences Likelihood Risk
rating
Fatality
Major Injuries
Minor Injuries
Negligible Injuries
Very Likely
Likely
Unlikely
Highly Unlikely
High
Medium
Low
Cleaning of the machine
with buckets of water or
hoses is extremely
dangerous and may lead
to electrocution. The
machine must only be
cleaned with a damp
cloth.
Clear warning
guide lines on
machine. Safe
work practices
including in
training manual.
Fatality Highly Unlikely Medium
Micro switch on guard
should never be
removed or tampered
with otherwise machine
could continue working
with body parts near
moving parts.
Safe work
guidelines
reinforce non
authorised
tampering with the
machine. Access
to micro switches
service
item only.
Major Injuries Likely High
Electrical isolation
switch should be fully
accessible to the
operator. Recommended
no more than 1.5 metres
above the floor.
Dependent on
store electrical
policy.
Major Injuries Unlikely Medium
Safety guard should not
be removed.
Microswitch
interlocked with
the machine will
not operate.
Major Injuries Likely Medium
To Next Page
Loading...
