SINO SDS2-2L User Manual

Dear Users:
Thank you for your purchase of the Digital Display Meter, of which the
main purpose is provide detection and positioning functions for
machine tool processing. Before use, please read the following safety
instructions and precautions for safety operation of the new digital
display meter device.
When using the manual:

Chapters and sections are listed in the table of contents( see P11/12
ahead).

This manual includes some instructions for panel keys of series-2 digital
display meter and other series, including.
SDS2-2M
SDS2-2MS
SDS2-2G
SDS2-2L
SDS2-3M
SDS2-3E
Digital display meter for universal 2-axis milling machine
Digital display meter for multifunctional 2-axis milling
machine
Digital display meter for universal 2-axis grinding machine
Digital display meter for universal 3-axis grinding machine
Digital display meter for universal 3-axis milling machine
Digital display meter for universal 3-axis electric spark
molding machine tool
It is recommended that:

Instructions for panel keys of the series-2 digital display meter that is
applicable to this manual are listed in P1~10 of the above Section 1.

Read through follow safety precautions and Section 2( see P112,
113, 114), which are very important to the safe operation of your digital
display meter.
Safety Precautions:
Caution:

Do not dampen or splash coolant directly onto the unit to avoid electric
shock or fire.
Warning:

Do not open the enclosure optionally to avoid electric shock, there is no
element repairable by the user inside. Turn to appointed technician for
repair.

SINO SDS2-2L Specifications

General

Brand	SINO
Model	SDS2-2L
Category	Touch Panel
Language	English

Summary

Safety Precautions

Caution

Avoid dampening or splashing coolant directly onto the unit to prevent electric shock or fire.

Warning

Do not open the enclosure optionally to avoid electric shock. Turn to appointed technician for repair.

Basic Functions (A1)

Basic Functions (A2)

200 Point Subsidiary Zero Positions (E1)

200 subsidiary zero position function

Function for setting and managing up to 200 user coordinate systems.

Zero Position Automatic Tracking (I1)

Zero Position Automatic Tracking

Function to automatically track and recall the datum zero mark of a working piece.

Tool Diameter Compensation (K)

The Tool Diameter Compensation Function

Function to automatically compensate for tool diameter during processing.

(EDM) Matching Output Function (O)

New type matching output function

Function for EDM processing, controlling depth and preventing accidents with negative anti-fire height.

Trouble shooting and handling

Troubleshooting of Grating Ruler and Digital display Meter

Identifies common issues with the display meter and grating ruler and provides solutions.