SINO SDS2-2M User Manual

Dear Users:
Thank you for your purchase of the Digital Display Meter, of which the
main purpose is provide detection and positioning functions for
machine tool processing. Before use, please read the following safety
instructions and precautions for safety operation of the new digital
display meter device.
When using the manual:

Chapters and sections are listed in the table of contents( see P11/12
ahead).

This manual includes some instructions for panel keys of series-2 digital
display meter and other series, including.
SDS2-2M
SDS2-2MS
SDS2-2G
SDS2-2L
SDS2-3M
SDS2-3E
Digital display meter for universal 2-axis milling machine
Digital display meter for multifunctional 2-axis milling
machine
Digital display meter for universal 2-axis grinding machine
Digital display meter for universal 3-axis grinding machine
Digital display meter for universal 3-axis milling machine
Digital display meter for universal 3-axis electric spark
molding machine tool
It is recommended that:

Instructions for panel keys of the series-2 digital display meter that is
applicable to this manual are listed in P1~10 of the above Section 1.

Read through follow safety precautions and Section 2( see P112,
113, 114), which are very important to the safe operation of your digital
display meter.
Safety Precautions:
Caution:

Do not dampen or splash coolant directly onto the unit to avoid electric
shock or fire.
Warning:

Do not open the enclosure optionally to avoid electric shock, there is no
element repairable by the user inside. Turn to appointed technician for
repair.

SINO SDS2-2M Specifications

General

Brand	SINO
Model	SDS2-2M
Category	Touch Panel
Language	English

Summary

Safety Precautions

Caution

Warnings about liquid contact to avoid electrical hazards.

Warning

Warnings about opening the enclosure to avoid electrical shock.

Usage: Start, Self check

Usage: Setting of System

Linear Error Compensation

Power Interruption Memory

Smooth R

Smooth R Arc Calculation function (ARC Function)

Function for calculating and processing circular arcs.

Smooth R Arc Calculation Function

Smooth R Arc Calculation Function Procedures

Smooth R Arc Calculation Function Parameters

Simple R

Simple Arc R Calculation function

Function for simpler circular arc processing.

Simple Arc R Calculation Function

Hole Drilling Along An Oblique Line

The function of hole drilling along an oblique line

Function for drilling holes along an angled line.

Hole Drilling Parameters

The Function For 200 Point Subsidiary Zero Positions (E1)

200 subsidiary zero position function

Explanation of the 200 user coordinate system function.

Understanding Subsidiary Zero Positions

Operator's Role in Subsidiary Zero Positions

Setting Subsidiary Zero Position

Methods for configuring subsidiary zero positions.

PCD Circle Equally Dividing Holes (F)

Circular arc equally Dividing Function(PCD Function)

Function for dividing a circle into equal segments for drilling.

PCD Function Parameters

Angular Surface Processing (G)

Angular Surface Processing

Function to simplify processing of angular surfaces.

Aligning for Bank Angle

Processing the angular surface

The Progressive Progressing of rectangular Inner chamber (H)

The progressive progressing of rectangular inner chamber

Function for progressive processing of inner chambers.

Inner Chamber Operation Procedure

Zero Position Automatic Tracking (I1)

Zero Position Automatic Tracking Operations

Operations in an example

Step-by-step guide for tracking the zero position.

Zero Position Automatic Tracking (I2)

Zero Position Automatic Tracking (I3)

Zero Position Automatic Tracking

Function to automatically track the datum zero mark.

The Function Calculator Function (J)

The Calculation function

Provides basic calculation capabilities during processing.

Calculation Function Details

Tool Diameter Compensation (K)

The Tool Diameter Compensation Function

Function to automatically compensate for tool diameter.

Tool Diameter Compensation Procedures

Digital Filter Function (L)

Digital filter function

Reduces display fluctuations caused by machine vibration.

Digital Filter Function Usage

200 Tool Storeroom (M)

200 tool storeroom

Function to store and manage up to 200 tools.

Tool Storeroom Operation

The Function Of Measure For Taper (N)

The Function of measure for taper:

Function to measure the taper of a workpiece.

Taper Measurement Operation

(EDM) Matching Output Function (O)

New type matching output function:

Function for EDM processing of spark machines.

EDM Function Details

Troubleshooting and handling

Troubleshooting of Grating Ruler and Digital display Meter

Common issues and their solutions for the device.