Need help?Do you have a question about the SINO SDS6-3V and is the answer not in the manual?
General| Input Signal | TTL square wave |
|---|---|
| Power Consumption | 25 VA |
| Number of Axes | 3 |
| Operating Voltage | 80~260V AC, 50~60Hz |
| Operating Temperature | 0°C - 45°C |
| Relative Humidity | <90% (no condensation) |
| Display Type | LED |
| Power Supply | AC 80V - 260V, 50/60 Hz |
| Humidity | <90% (no condensation) |
Corrects system errors using segmented compensation for improved accuracy.
Calculates and processes circular arcs, offering control over smoothness.
Facilitates drilling holes at specific angles, simplifying complex calculations.
A simplified function for processing simple circular arcs with average smoothness requirements.
Divides circular arcs into equal sections for drilling or milling operations.
Enables easier processing of large angular surfaces by simplifying setup.
Aligns the workpiece for accurate angular surface processing.
Automatically compensates for tool diameter to ensure accurate processing dimensions.
Stores and manages data for up to 200 different tools for efficient operation.
Function for EDM processing, controlling machine tool based on Z-axis depth.
To Next Page
