Need help?Do you have a question about the SINO SDS6 and is the answer not in the manual?
General| Power Consumption | ≤15W |
|---|---|
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Number of Axes | 2 or 3 axes |
| Humidity | ≤85% RH (non-condensing) |
Guide to starting, self-checking, and configuring system settings like axis resolution and machine type.
Step-by-step guide for using the Smooth R Arc Calculation function, including parameters and examples.
Explains the function for drilling holes along an oblique line and required input data.
Explains the 200 auxiliary zero position function (UCS) and key concepts for its use.
Explains the 200 auxiliary zero position function (UCS) for lathe operations.
Explains the 200 auxiliary zero position function (UCS) for grinding operations.
Describes the function for dividing a circular arc equally for drilling holes or similar tasks.
Explains how to use the function to automatically compensate for tool diameter during processing.
Guide to setting up and using the 200 tool storeroom for managing tools.
Procedure for measuring the taper of a workpiece using the digital display meter.
To Next Page
