What to do if SINO Water Pump doesn't respond when pressing the power button?
If your SINO Water Pump does not respond when you press the power button, it could be due to a low battery and no AC power supply connected. Connect the AC power supply and keep charging the battery. If this does not solve the issue, the power system may have a failure, and you should send it back to the factory.
Why does the “Occlusion” alarm frequently occur in the infusion process of SINO V Series Water Pump?
Frequent “Occlusion” alarms during the infusion process of your SINO Water Pump can occur if the infusion apparatus pipeline is tied or the roller clamp isn't open. Recheck the pipeline of the infusion apparatus. Alternatively, the pressure level might be set too low, so increase the pressure level. If the issue persists, there may be a failure in the pressure testing system.
How to fix “Drip Error" message that appears frequently when the drip sensor alarm function is enabled on SINO V Series Water Pump?
If the “Drip Error" message appears frequently when the drip sensor alarm function is enabled on your SINO Water Pump, it may be due to incorrect installation of the drip sensor. Reinstall the drip sensor correctly. It could also be that the infusion apparatus is inappropriate or not calibrated properly; select a calibrated infusion apparatus or recalibrate the infusion apparatus.
Stipulations, overview, electrical, mechanical, application safety, and symbols/labels for safe operation.
General description, model variations, intended uses, and target users of the V Series Infusion Pump.
Comprehensive details on flow rates, accuracy, occlusion, power, environment, and dimensions.
Description of the pump's physical components, structure, and communication interfaces.
Steps for installing the pump, connecting power, and initial startup including self-test.
Guide to setting up infusion components, selecting modes, and configuring parameters.
Customizing advanced parameters, history inquiry, IV set calibration, and special functions.
Operation of Bolus, lighting, communication, sleep, keyboard lock, and battery management.
Detailed explanations of various alarms including occlusion, bubble, battery, system errors, and their handling.
How to adjust the priority and volume of device alarms.
A guide to diagnosing and resolving frequently encountered issues with the infusion pump.
Procedures for routine cleaning, battery upkeep, and periodic alarm system verification.
Analysis of infusion rate accuracy through graphical data and occlusion detection performance.
Compliance information and guidelines regarding electromagnetic emissions and immunity standards.
A list of all items included in the standard delivery of the V Series Infusion Pump.
Contact information for the manufacturer and its authorized European representative.
General| Category | Water Pump |
|---|---|
| Model | V Series |
| Power Source | Electric |
| Material | Cast Iron/Stainless Steel |
| Voltage | 220-380 V |
| Frequency | 50Hz/60Hz |
To Next Page