To Next PageTo Next Page
Need help?Do you have a question about the Sinoboom GTJZ1932ME and is the answer not in the manual?
Covers hazards related to electricity and protective measures.
Ensures safe operation by managing platform load and stability.
Addresses hazards related to the work environment and jobsite conditions.
Guidelines for safe operation, preventing falls and collisions.
Safety precautions for machine components, fire, and battery.
Safety requirements for welding and procedures after machine use.
Detailed physical dimensions, weight, and platform specifications for models.
Specifications for hydraulic oil, pumps, motors, and electrical system voltage.
Torque specifications for hydraulic hoses and fittings based on thread size.
Torque values for metric and unified thread standard fasteners.
Details the battery configuration and DC motor for powering the machine.
Describes the hydraulic system for steering and platform lifting functions.
Explains the electrical system, battery power, and protection breakers.
Details the machine's control system with dual controllers and data bus.
Describes safety features including sensors, limit switches, and pothole guards.
Provides general information on machine preparation, inspection, and maintenance.
Outlines the necessity and procedures for performing preventive maintenance.
Recommendations for proper storage to ensure cylinder performance and prevent corrosion.
General safety precautions and measures to take before servicing the machine.
Procedures and requirements for performing a pre-delivery inspection before machine delivery.
Guidance on adhering to the regular maintenance schedule using inspection procedures.
Instructions for completing and documenting repair and inspection reports.
Procedures for repairing platform controller and related parts.
Instructions for removing and repairing scissor arm and extension platform.
Procedures for replacing and maintaining chassis components like tires and rims.
Procedures for removing and installing the hydraulic power unit and valves.
Details on battery maintenance, charging, and troubleshooting for the electrical system.
Information on identifying and resolving machine faults and errors.
List of inspection items for Checklist A, covering manuals and decals.
List of inspection items for Checklist B, covering wires, tires, and battery.
List of inspection items for Checklist C, covering filters, weighing, and limit switches.
List of inspection items for Checklist D, covering bearings, sliders, and hydraulic oil.
General| Working Height | 21.5 m |
|---|---|
| Platform Height | 19.5 m |
| Overall Length | 4.7 m |
| Overall Width | 1.93 m |
| Weight | 11700 kg |
| Platform Capacity | 250 kg |
| Axles | 2 |
| Tyres | Solid |
| Tire Type | Solid |
