To Next PageTo Next Page
Need help?Do you have a question about the Sinoboom GTJZ1212E and is the answer not in the manual?
Definitions of safety alert symbols and terms used in the manual.
Procedure for reporting accidents and their impact on warranty.
Precautions against electrical shock and maintaining safe distances.
Information on platform load capacity and factors causing tipping.
Hazards related to jobsite conditions and environmental factors.
General unsafe practices to avoid during machine operation.
Risks associated with falling from the platform or structure.
Hazards related to machine movement and collision avoidance.
Risks of getting body parts crushed by machine movement.
Precautions for flammable atmospheres and fuel handling.
Risks associated with operating a damaged or malfunctioning machine.
General risks of personal injury during machine operation.
Safety precautions for battery handling and charging procedures.
Safety guidelines for performing welding and polishing operations.
Procedures for parking, securing, and shutting down the machine.
Identifying and avoiding hazards at the work site before operation.
Guidance on performing thorough pre-operation checks for safety.
Steps for checking machine parts and overall condition before use.
Procedure for checking hydraulic oil level and type.
Procedure for checking battery charge level via the display.
Checking the correct mode setting for GTJZ1212E.
Steps to set up the test area and ensure machine readiness.
Verifying the functions and operation of the ground control console.
Verifying the functions of the platform control joystick and buttons.
Verifying the machine's drive speed and response characteristics.
Verifying the proper operation of the emergency platform lowering mechanism.
Verifying the machine's tilt alarm and protection system.
Verifying the automatic extension and function of the pothole guard.
Verifying the functionality of the optional weighing system.
How to activate and reset the emergency stop function.
Procedure for activating emergency platform lowering.
Methods to release brakes for towing or dragging the machine.
Procedures for operating the machine from the ground controller.
Procedures for operating the machine from the platform controller.
Operating instructions specific to the SINOBOOM control system.
Operating instructions specific to the DTC control system.
How to extend and retract the platform extension.
Procedures for folding and unfolding platform rails for transport.
Precautions and procedures for driving the machine on inclines.
Instructions for charging lead-acid and lithium batteries.
How to set the indoor or outdoor operating mode for specific models.
Safe procedures for lifting the machine using a forklift.
Safe procedures for lifting the machine using a crane.
Requirements for securing the machine on trucks or trailers.
Steps for performing a pre-delivery inspection before machine transfer.
Guidelines for routine maintenance schedules and inspection procedures.
How to fill out and manage repair and inspection reports.
Documenting major machine modifications and repairs.
Identifies decals and nameplates according to Great Britain standards.
Identifies decals and nameplates according to CE metric standards.
Identifies decals and nameplates according to Australian Standards.
Identifies decals and nameplates according to Canadian Standards.
Visual guide to common symbols used throughout the manual.
Template for recording pre-delivery inspection details.
Forms for documenting machine repairs and inspections.
Template for documenting major machine modifications and repairs.
General| Brand | Sinoboom |
|---|---|
| Model | GTJZ1212E |
| Category | Lifting Systems |
| Language | English |
