EasyManua.ls Logo

Sinotec CRB-3368 - Page 5

Sinotec CRB-3368
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BOTTOM OF SET
Battery compartment for 1.5 volt (2X AA/ LR6/ UM-3) batteries 2pcs. (not included) for
temporary time storage.
SET TIME
1. Press and hold TIME SET for two seconds.
2. Press HOUR or MINUTE to select 12/24 hours and then press TIME SET
again to confirm setting.
3. Press on “TIME SET” : hours is blinking.
4. Press TUNNING -” and “TUNNING +” to change hours down or up.
5. Press “TIME SET”: minutes is blinking.
6. Press TUNNING -” and “TUNNING +” to change minutes down or u.p
7. Press “TIME SET ” to validate.
LISTEN TO FM RADIO
For better reception, fully extend and adjust the position of the FM antenna
wire.
1. Press / FUNCTION to turn on FM radio.
[FM frequency] is displayed.
2. Press TUNING - / + for two seconds.
The FM Tuner tunes to a station with strong reception automatically.
Press TUNING - / + repeatedly to tune to a radio station.
STORE FM RADIO STATIONS
You can store up to 20 FM radio stations in preset channel automatically or
manually.
STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN)
1. Press the / FUNCTION to turn on FM radio.
2. Press the SCAN for two seconds.
The received stations are automatically stored to preset numbers.
3. Press “TIME SET to select the automatically stored station from P 01 to
P20.
STORE FM RADIO STATIONS MANUALLY.
1. Tune to a FM radio station.