1. Press / FUNCTION to Clock mode.
2. Press and hold AL1/AL2 for two seconds.
[0:00] Hour digit is blink.
3. Press “TUNNING -” and “TUNNING +” to change hours down or up.
4. Press “AL1/AL2”: minutes is blinking.
5. Press “TUNNING -” and “TUNNING +” to change minutes down or up.
6. Press “AL1/AL2” , digit is blink.
7. Press “TUNNING -” and “TUNNING +” to select the FM radio or the
buzzer. “ ” means buzzer, “ ” means FM radio.
8. Press “AL1/AL2” then we can set the alarm volume.
9. Press “TUNNING -” and “TUNNING +” to change alarm volume down or up.
It can be from to .
10. Press “AL1/AL2” to confirm the ALARM TIMER.
SNOOZE ALARM
When alarm sounds, press SNOOZE to activate the snooze time 9 minutes.
11. The AL1 / AL2 indicator keeps blinking.
SET SLEEP TIMER
This clock radio can switch to standby mode (radio off) automatically
after a preset period.
1. Press / FUNCTION to radio mode.
2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly to select
the sleep timer period (in minutes).
Sleep indicator is light up.
To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP multi-function
button repeatedly until you return the timer to off mode.
Sleep Timer period cycle as follow :
90 > 80 > 70 > 60 >50>40>30 >20>10
OFF
ADJUST VOLUME
While listening, press VOLUME + or VOLUME – to adjust volume.
ADJUST DISPLAY BRIGHTNESS
To Next Page
Loading...