Repeat
While in play mode , press the REPEAT button to set repeat mode.
1. For DVD, as you press the REPEAT button, the TV screen will displays: Chapter,
Title, All.
2. For VCD, CD, CD-R discs, press the REPEAT button, the screen will displays:
Track, All.
3. For MP3, JPEG and other media files, the screen will displays: Single, Repeat one,
Repeat Folder, Repeat off.
A-B Repeat
While in play mode, press the REP. AB button to set the section for repeating.
1. Press the REP.AB button once at the beginning of the section (A).
2. Press the REP.AB button at the end of the section (B). Section AB will automatically
be repeated.
3. Press the button again to exit.
Standby mode
To switch the unit to the standby mode, press the STANDBY button on the remote
control or on the front panel. Press it again to turn on the unit.
Title
If a DVD contains a directory volume, press the TITLE button to display the list of
titles in this disc. Use the direction button to move the cursor or digital buttons to select
the items that you want to play.
Volume setting
Press the VOL.+/-buttons to turn the volume up or down.
Stop
In play mode, press the STOP button once, the player will stop playing; the stop
position will be memorized. Press the ENTER button to continue playing from the
stop point.
If you press the STOP button twice, the stop position will not be memorized, press the
ENTER button, play will start from the beginning.
BASIC OPERATIONS
It is possible to listen to the Audio and watch Video/JPG files using the USB
device of this unit. Before operating, please switch to the DVD mode first.
1. Connect the USB device to the unit.
2. Press the USB button on the remote control, the player will automatically detect the
device. If the device is found, the player will automatically start playing its content or
menu of the device.
3. Press MENU to display the File browser. Press the direction buttons to select the files
you want and press ENTER to start playing.
Note: The method of playback for files which are saved on a media device is the
same as it is for other discs. For more information, see BASIC OPERATION.
4. Press DVD, FM button to other modes.
Note:
1) USB-Extension cable should have a max. length of 0.5 m.
2) Depending on the amount of data and media speed, it may take longer for the
system to read the contents of the media device. In some cases, reading time may
be as long as 60 seconds. This is not a malfunction.
3) Even when the files are in a supported format, some may not play or display
depending on the content.
USB
BASIC OPERATIONS
Play/ Pause
While playing a disc, press the PLAY/PAUSE button to pause, press the button again or
ENTER button to continue the playing.
Reset
In No Disc status, pressing the RESET button will return you to the original setup or the
default value.
To Next Page
Loading...