EasyManua.ls Logo

Sintrol S305 User Manual

Default Icon
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Distributor
S304 and S305 Dust Emission Monitors
User Manual
Version 6.6
11.07.2013
Question and Answer IconNeed help?

Do you have a question about the Sintrol S305 and is the answer not in the manual?

Sintrol S305 Specifications

General IconGeneral
BrandSintrol
ModelS305
CategorySecurity Sensors
LanguageEnglish

Summary

INTRODUCTION

Safety Precautions

Model LV requires 115 VAC, model HV requires 230 VAC. Precautions for lethal voltage.

INSTALLATION

Installation Location Selection

Choose duct section with even, laminar flow, away from bends/obstructions.

WIRING AND OUTPUT CIRCUITS

TECHNICAL SPECIFICATION

OPERATION

Automatic Setup Procedure

Sets the measuring range by detecting typical dust flow, setting it to 20% of full scale.

Self Diagnostics

Unit performs periodic zero and span checks for self-diagnostics, with configurable intervals and alarms.

Calibration to mg/m³

Procedure for calibrating the monitor to display concentration in mg/m³ using gravimetric sampling.

TROUBLESHOOTING

Related product manuals