Need help?Do you have a question about the Sionyx Nightwave Series and is the answer not in the manual?
Lists all items included in the Nightwave camera packaging.
Identifies and labels all physical components of the camera unit.
Explains the meaning of different LED color codes during operation.
Step-by-step guide to separating the camera from its base plate.
Instructions for properly connecting power and video cables to the camera.
Advice on selecting the optimal mounting position for the camera.
Detailed instructions for physically attaching the camera to a surface.
Explains the two possible mounting positions: ball-up and ball-down.
Guidelines on selecting and using appropriate cables for the camera system.
Recommendations for safely and efficiently routing cables.
Ensuring cables are secured to prevent strain and disconnection.
Importance of isolating circuits for sensitive electronic equipment.
Specifies the necessary conditions for the installation location.
Steps for establishing a power connection to the camera.
How to connect the camera's video output to a display device.
Procedure for setting the camera's vertical viewing angle.
Essential guidelines for safe operation and handling of the product.
Important warnings regarding product use and potential hazards.
Notes on operational cautions, user notices, and regulatory compliance.
Information regarding compliance with Industry Canada regulations.
Information regarding compliance with Federal Communications Commission rules.
Further important safety advice and handling recommendations.
Information on RF exposure limits and related regulatory warnings.
Link to download the official installation template for the camera.
Details regarding the product's warranty coverage and terms.
Official statement confirming the product's compliance with relevant standards.
General| Lens Mount | C-Mount |
|---|---|
| Frame Rate | 60 fps |
| Sensor Type | CMOS |
| Power | 12V DC |
| Spectral Response | 400nm – 1200nm |
| Power Supply | 12V DC |
To Next Page
