What should I do if there is no display on my SIP Scooter speedometer?
If there is no display, the speedometer may not be connected to the power supply, or the battery may be defective or too weak. Ensure the speedometer is connected correctly and all cables are intact. Check the battery voltage and replace it if necessary.
What to do if the SIP SPEEDO-REVCOUNTER 2.0 temperature is not displayed correctly?
If the temperature is not displayed or is displayed incorrectly, the sensor on the spark plug may be defective or broken, or the plug-in connection may be broken. Replace the sensor or check the wiring sensor and replace if necessary.
Why won't my SIP Scooter tacho work with my 6V ignition?
The speedometer only functions with 12V DC or AC voltage. You will need to install a 12V ignition.
What does "3F: 7F" on my SIP Scooter time display mean?
If the time display shows "3F: 7F", it indicates overvoltage at the IC of the clock, meaning the speedometer has received overvoltage from a voltage peak. Check the voltage regulator and replace it if necessary. The clock may be defective due to overvoltage, requiring replacement of the speedometer. Poor or incorrectly designed ground connections could not dissipate voltage peaks.
General| Material | Plastic |
|---|---|
| Display | Digital |
| Operating Voltage | 12V |
| Suitable Vehicles | Vespa |
| Functions | Speedometer, Rev Counter, Temperature, Time |
To Next Page
