EasyManua.ls Logo

SIP STAR 300 - User Manual

SIP STAR 300
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
vrtavkasti zgrabljalnik
rotacioni sakupljač
ranghinatore rotante
rotary windrower
kreiselschwader
andaineuse rotative
Velja od tov štev. dalje:
Važi od tvor. broja dalje:
Ab masch. Nr.:
From mach Nr.:
Da macch. Nr.:
N° de machine :
STAR 350/8 ALP = 376
SLO
Navodilo za uporabo
HR
Uputstvo za rukovanje
GB
Instruction for work
D
Betriebsanleitung
I
Istruzioni di lavoro
F
Mode d'emploi
STAR 350
/
8 ALP

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the SIP STAR 300 and is the answer not in the manual?

Summary

General Safety Instructions

General Safety Rules

Machine's intended use, user responsibility, and general safety rules for operation.

Safety Decals and Warnings

Understanding safety decals and warnings to identify hazards and prevent accidents.

Safety in Preparation and Maintenance

Critical safety precautions for machine preparation, attachment, and maintenance.

Machine Specifications and Adjustments

Technical Data Overview

Detailed technical specifications including dimensions, power, and PTO speed.

Front Axle Load Calculation

Method for calculating minimum front ballast for tractor stability.

Swather Adjustment Procedures

Steps for adjusting basic settings, tines, height, and chassis for optimal swathing.

PTO Shaft Operation and Safety

Guidelines for safe PTO shaft use, including overload clutch and length adjustment.

Operational Procedures and Safety

Attaching and Detaching the Machine

Procedures and safety precautions for connecting and disconnecting the machine.

Traffic Regulations and Road Transport

Safety rules and considerations for transporting the machine on public roads.

Maintenance, Storage, and Parts

Routine Maintenance and Lubrication

Guidance on routine maintenance, lubrication, and tightening specifications.

Storage and Restart Procedures

Instructions for storing the machine and preparing it for use.

Ordering Original Spare Parts

How to order spare parts, emphasizing the importance of original parts.

Special Equipment

Support Wheel Installation and Use

Mounting and using the support wheel for improved ground following.

Summary

General Safety Instructions

General Safety Rules

Machine's intended use, user responsibility, and general safety rules for operation.

Safety Decals and Warnings

Understanding safety decals and warnings to identify hazards and prevent accidents.

Safety in Preparation and Maintenance

Critical safety precautions for machine preparation, attachment, and maintenance.

Machine Specifications and Adjustments

Technical Data Overview

Detailed technical specifications including dimensions, power, and PTO speed.

Front Axle Load Calculation

Method for calculating minimum front ballast for tractor stability.

Swather Adjustment Procedures

Steps for adjusting basic settings, tines, height, and chassis for optimal swathing.

PTO Shaft Operation and Safety

Guidelines for safe PTO shaft use, including overload clutch and length adjustment.

Operational Procedures and Safety

Attaching and Detaching the Machine

Procedures and safety precautions for connecting and disconnecting the machine.

Traffic Regulations and Road Transport

Safety rules and considerations for transporting the machine on public roads.

Maintenance, Storage, and Parts

Routine Maintenance and Lubrication

Guidance on routine maintenance, lubrication, and tightening specifications.

Storage and Restart Procedures

Instructions for storing the machine and preparing it for use.

Ordering Original Spare Parts

How to order spare parts, emphasizing the importance of original parts.

Special Equipment

Support Wheel Installation and Use

Mounting and using the support wheel for improved ground following.

SIP STAR 300 Specifications

General IconGeneral
BrandSIP
ModelSTAR 300
CategoryFarm Equipment
LanguageEnglish

Related product manuals