Sirius Technologies, Inc.
418-B Cloverleaf Dr. Baldwin Park, CA 91706
•TEL:(626)934-0100 • FAX:(626)934-0161 •E-Mail: INFO@SIRIUSTEC.COM
Page 10
Power Saving Mode (Datalogging)
Sampling rate longer than 5 minutes (5min / 10min / 30min / 1 hour) will automatically turn
on power-saving mode. The ST501 will be in power-saving mode during the
non-samping period. One minute before the sampling time, the ST501 will turn on to
take the sample. After the sampling is done, the ST501 will turn back to power-saving
mode. While in the power-saving mode, the ST501 will not respond to any key inputs.
Hold
for 2 seconds to exit the datalogging mode.
Sampling Interval Power-Saving
5 seconds
10 seconds
1 minutes
5 minutes
9
10 minutes
9
30 minutes
9
1 hour
9
To Next Page
Loading...