What does 'Updating' mean on Sirius XM Radio?
If your Sirius XM Radio displays 'Updating', it means your Roady BT is updating with the latest encryption code. Wait until the update is complete. Alternatively, you may be trying to tune to a channel that is blocked or unavailable, so try tuning to another channel.
What does 'Loading' mean on Sirius XM Radio?
If your Sirius XM Radio displays 'Loading', it means your Roady BT is acquiring audio or program information. This message should disappear within a few seconds.
What to do if I don't receive all channels on Sirius XM Radio?
To receive all the channels to which you have subscribed on your Sirius XM Radio, first ensure that you have completed the activation steps. If you have, visit www.siriusxm.com/refresh and follow the instructions to refresh your radio.
Why does my Sirius XM Radio audio fade or have static?
If you are experiencing audio that fades or has static when listening to your Sirius XM Radio, begin by checking all the cables to ensure they are firmly and securely connected. If you're using the FM audio connection, the issue is most likely interference from another FM station. In this case, you will need to find an unused FM channel in your area.
Why is there no audio with FM connection on Sirius XM Radio?
If you're not getting any audio when using the FM audio connection option on your Sirius XM Radio, the first thing to check is whether your Roady BT and your vehicle’s FM radio are tuned to the same FM channel. Make sure they match.
What to do if Sirius XM Radio says 'Check Antenna Connection'?
If your Sirius XM Radio displays 'Check Antenna Connection', ensure the antenna cable is firmly and securely plugged into the Intelligent Power Adapter and that the cable isn't bent or broken. Try turning your Roady BT off and then on to reset the message. If the message continues, the magnetic mount antenna cable is likely damaged and needs to be replaced.
How to improve Sirius XM Radio signal?
If your Sirius XM Radio is not acquiring a signal, make sure your vehicle is outdoors with a clear view of the sky and that the Magnetic Mount Antenna is mounted outside. Move the antenna away from any obstructed areas. If you are in an underground garage, you should receive a signal after leaving the garage.
Why is there no audio connection on Sirius XM Radio?
If you're not hearing any audio from your Sirius XM Radio, you must select an audio option and establish the audio connection. Refer to 'Step 6: Connect the Audio' on page 19 for instructions on selecting and installing an audio connection.
How to fix too soft audio on Sirius XM Radio?
If the audio sounds too soft on your Sirius XM Radio, try raising the volume of your vehicle’s radio/head unit or increasing the audio level of your Roady BT until the sound quality improves. Refer to 'Audio Level' on page 50.
What does 'Channel Off Air' mean on Sirius XM Radio?
If your Sirius XM Radio indicates 'Channel Off Air', it means that the channel you've selected is not currently broadcasting. Simply tune to another channel.
General| Type | Satellite Radio Receiver |
|---|---|
| Brand | SiriusXM |
| Model | Roady BT |
| Bluetooth | Yes |
| Power Source | 12V Power Adapter |
| Audio Output | AUX |
| Presets | 20 |
| Display | Color Display |
Provides essential safety precautions and care instructions for operating the device.
Provides detailed instructions for installing either the dash or vent mounting system.
Explains how and where to properly mount the magnetic SiriusXM antenna.
Provides guidance on safely routing the antenna cable through the vehicle interior.
Explains the options for connecting the audio output to the vehicle's sound system.
Steps to subscribe to SiriusXM service and activate the Roady BT radio.
Addresses issues like no audio, soft audio, fading, static, and Bluetooth pairing failures.
To Next Page
