Siruba C007J User Manual

From the library of: Superior Sewing Machine & Supply LLC
General Safety Instructions
Warning ! When using this machine, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury, including the following.
Read all these instructions before operating this product and save these instructions.
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power to rain. Do not use machine tools in damp or wet locations. Keep work area
well lit. Dot not use power tools where there is risk to cause fire or explosion.
3. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges refrigerators).
4. Keep children away.
Do not let visitors touch the tool or extension code.
5. Dress properly.
Do not wear loose clothing or jewelry, they can be caught in moving parts. Wear protecting hair
covering to contain long hair.
6. Do not abuse the cord.
Never carry the machine by cord or yank it to disconnect it from the socket. Keep the cord away
from heat, oil and sharp edges.
7. Maintain machine with care.
Follow instructions for lubrication and changing accessories. Inspect tool cord periodically and if
damaged have it repaired by an authorized serviced facility.
8. Disconnect machine
When not in use, before servicing and when changing accessories.
9. Avoid unintentional starting.
Do not carry a plugged - in tool with a finger on the switch. Ensure switch is off when plugging in .
0. Check damaged parts.
Before further use of the tool, a guard or other part that is damaged should be carefully checked to
determine that it will operate properly and perform its intended function.
1. Warning.
The use of any accessory or attachment, other than those recommended in this instruction
manual, may present a risk of personal injury.
2. Have your tool repaired by a qualified person.
Repairs should only be carried out by qualified persons using original spare parts.
Special Warning For Electric Connection I
1. Incorporate this machine only with "CE" certificate hold -to- run control device.
2. Follow the instruction manual device to install control device.
3. Always earth machine appropriately during operation.
4. Before adjustment, parts change or servicing must be sure to pull out the plug from socket to prevent
the hazard of unintentionally start of machine.
From the library of: Superior Sewing Machine & Supply LLC

Siruba C007J Specifications

General

Brand	Siruba
Model	C007J
Category	Sewing Machine
Language	English