•~~~~H9~&m~.~~~~~~
~~:
l.~~~~S~H··~~-~~Hm
fFiW
•
~~li®~)JIHIH
o
-7-
h.
Never operate the sewing
machine after the ground wire is
removed to avoid electrical
shock hazards.
i.
Please turn the power switch off
before connecting or
disconnecting the power plug to
prevent possible accidents due
to electric shock or damaged
electronic components.
Please confirm the
followings to avoid
malfunction or damage to this machine.
0
1.
After installing the machine, and
before the first operation, please
clean it completely.
0
2.
Clean all dust and overflowed oil
during transportation.
0
3.
Confirm that the voltage and the
phase (single or 3 phase) of motor are
set correctly.
e>
4.
Confirm that the power plug is
correctly connected to the power
supply.
{S)
5.
Never use the machine when the local
voltage type is different from the
marked voltage
on
the nametag
attached
on
the machine.
0
6.
Confirm that the rotating direction of
the machine
pulley is correct.
A warning:
Before doing any operation or any
adjustment described later
in
this
manual, please turn the power off to
prevent accidents caused by abrupt
start of the sewing machine.
From the library of: Superior Sewing Machine & Supply LLC
To Next Page
Loading...
Need help?
General
