Siruba C007KD - Page 48

15.
加裝CL如遇 抬壓腳力道 不足時。
If the strength or the presser foot
lifter is insufficient with being
equipped with CL.
請依下列實 施：
Ａ.參數64項， 出廠值：40 改為100
Ｂ.參數65項， 出廠值：10 改為28
.Parameter No.64,default: 40 change to 100.
Parameter No.65,default: 10 change to 28.
P lease implement the procedure as below:
Ａ
Ｂ.
From the library of: Superior Sewing Machine & Supply LLC