Siruba F007KD - Page 14

P-27
吸氣維持功率
suction maintain
power
1-100% 70%
P-28
吸氣釋放時間
suction release time
0-500ms 20ms
P-29
吸氣保護時間
suction protection
time
1-120s 30s
吸氣單次動作最長時間
the longest time of suction
single action
P-30
壓腳觸發模式
foot presser trigger
mode
0:關閉 1:開啟
0: close 1:start 0
1 為觸發模式：後踏抬壓腳中
立不會自動放壓腳
0 為跟隨模式：後踏抬壓腳、
中立或前踏放壓腳
1 is trigger mode: back step
the pedal the foot presser
lifting, middle step the pedal the
foot presser can not lift
0 is the following mode: back
step the foot presser lifting,
middle step or front step release
the foot presser
P-31
後抬腳啟動時間
back foot presser
lifter start time
0-2000ms 0
後踏延遲啟動壓腳的時
間 the time of back step
delay start foot presser
P-32
抬壓腳動作維持時
間 foot presser lifter
action maintain time
50-1000ms 160ms
此參數暫時不用 this
parameter do not use now
P-33
抬壓腳全力功率時
間 foot presser lifter
full power time
35-1000ms 160ms
P-34
抬壓腳全力功率時
功率 the power when
the foot presser
lifter full power
5-100% 100%
P-35
抬壓腳維持功率
foot presser lifter
maintain power
1-500% 20%
P-36
抬壓腳釋放時間
foot presser lifter
release time
0-120ms 30ms
壓腳釋放時間 the foot
presser lifter release time
P-37
抬壓腳保護時間
foot presser lifter
protection time
1-100s 10s
壓腳單次抬起最大維持
時間 the biggest maintain
time of the foot presser
lifter single time
P-38
顯示速度
display time
200-6500RPM
顯示當前電機實際速度
display the current motor
real speed
P-39
顯示速控器電壓
display the volt of
speed controller
14-1010
中點電壓
195
Neutral
point volt
顯示當前速控器電壓 0—
1024，相當於 0-5V
Display the current speed
controller volt 0-1024, it is
equal 0-5V