歡迎使用本公司產品，制衣行的正確投資選擇！
Welcome to use the our products, it is the right investment choices in garment industry!
本說明書為本公司新研發的“節能 2 路 24V 直驅控制箱”產品參考手冊，請認真閱讀此手冊
以更好運用本公司產品。
This manual is a new product reference manual of the company's "Energy Saving 2 way 24V Direct
Drive Control Box". Please read this manual carefully to make better use of our products.
一、安全說明：General SafetyInstructions
1：電機電控接通電源時（開機狀態）請不要把腳放在腳踏板上
Do not put your feet on the pedals when the control box and motor is switched on (boot status)
2：本產品請專業人士安裝調試
Let professionals to install and debug this product
3：嚴禁在通電時打開控制箱與電機端蓋
Do not open the control box and the motor cover when energized
4：換針，穿線或更換底線時請關閉電源
Please turn off the power when changing the needle,threading or replacing the bottom line
5：安裝，拆卸維修時請拔掉電源插頭
During installation and removal service,please turn off the power and pull the plug
6：翻抬縫紉機時請關閉電源
Please turn off the power when turn lift sewing machine
7：使用本產品請遠離高頻電磁波和電波發射器等，以免所產生的電磁波干擾伺服驅動器而發
生錯誤動作。
When use this product, please stay away from high-frequency electromagnetic waves and radio wave
transmitters, etc., in case the electromagnetic waves generated interfere with the servo drive to
occur wrong action .
鄭重申明：
Solemnly Declare:
1：不遵守安全使用說明操作規章，發生意外後果自負。
Do not comply with the manual book operating regulations and the safety requirements, all
accidental occurrence should be taken by yourself.
2：未經本公司授權，請勿擅自改動產品，由此而引起的後果本公司不負任何責任。
Without our authorization, please do not alter our products, our company is not liable for any
consequences arising therefrom.
To Next Page
Loading...
Need help?
General
