Need help?Do you have a question about the Sita LCD Series and is the answer not in the manual?
Follow European rules EN 60204-1 for electrical equipment safety and connect to grounding.
UV light can cause burns to skin and eyes; ensure UV lamp is housed and PVC cover inserted.
Dispose of mercury lamps and electrical panels as special waste according to law.
Verify water and electrical connections are correct and unit is producing disinfected water with correct LED signals.
Servicing is easy due to simple principles; quarterly check quartz sleeves for maximum disinfection.
Only trained personnel for maintenance. Use original parts. Replace UV lamp every 9000 hours.
Diagram showing recommended installation layout including filter, UV-C disinfection, and test plugs.
Step-by-step instructions for assembling the UV chamber, including inserting quartz sleeves and o-rings.
Detailed diagram with parts list and specifications for the UV-C chamber for model UV 80/3.
Details the electrical panel description for RACK LCD and RACK LCD PLUS models, including connectors and indicators.
Explains the electrical board layout for the RACK LCD model, including terminals, ballast, and sensor connections.
Illustrates the display sequences and states for the Rack LCD model, including STAND BY, WAIT, and NEW LAMPS.
Details the display sequences, states, and alarms for the Rack LCD Plus model, showing UVC, TEMP, and alarm conditions.
General| Brand | Sita |
|---|---|
| Model | LCD Series |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
