Sitecom WL-308 - Page 23

WL-308 Gaming Router Full Manual
23
DHCP
Click on the DHCP link in the navigation menu. This page displays the routing
details configured for your router.
 Local: The IP address and, where appropriate, port number of the local
application.
 NAT: The port number of the LAN-side application as viewed by the WAN-side
application.
 Internet: The IP address and, where appropriate, port number of the
application on the Internet.
 Protocol: The communications protocol used for the conversation.
 State: State for sessions that use the TCP protocol.
o NO: None -- This entry is used as a placeholder for a future
connection that may occur.
o SS: SYN Sent -- One of the systems is attempting to start a
connection.
o EST: Established -- the connection is passing data.
o FW: FIN Wait -- The client system has requested that the connection
be stopped.
o CW: Close Wait -- the server system has requested that the
connection be stopped.
o TW: Time Wait -- Waiting for a short time while a connection that was
in FIN Wait is fully closed.
o LA: Last ACK -- Waiting for a short time while a connection that was in
Close Wait is fully closed.
o CL: Closed -- The connection is no longer active but the session is
being tracked in case there are any retransmitted packets still
pending.
 Priority: The priority given to packets sent wirelessly over this conversation
by the WISH logic. The priorities are:
o BK: Background (least urgent).
o BE: Best Effort.
o VI: Video.
o VO: Voice (most urgent).
 Time Out: The number of seconds of idle time until the router considers the
session terminated. The initial value of Time Out depends on the type and
state of the connection.
o 300 seconds - UDP connections.
o 240 seconds - Reset or closed TCP connections. The connection does
not close instantly so that lingering packets can pass or the connection
can be re-established.
o 7800 seconds - Established or closing TCP connections.