WAN Settings
This page allows you to manually configure the ADSL/WAN settings. The settings on this
page require some knowledge concerning the WAN configuration. We advise less-
experienced users to configure the WAN settings using the Wizard.
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a virtual circuit.
VPI: The valid range for the VPI is 0 to 255. Enter the VPI assigned to you. This field
may already be configured.
VCI: The valid range for the VCI is 32 to 65535. Enter the VCI assigned to you. This field
To Next Page
Loading...
