Advanced Settings
QoS
QoS allows you to classify Internet application traffic by source/destination IP address
and port number. You can assign priority for each type of application and reserve
bandwidth for it. The packets of applications with higher priority will always go first.
Lower priority applications will get bandwidth after higher priority applications get
enough bandwidth. This can let you have a better experience in using critical real time
services like Internet phone, video conference …etc. All the applications not specified by
you are classified as rule name “Others”. The rule with a smaller priority number has a
higher priority; the rule with a larger priority number has a lower priority. You can adjust
the priority of the rules by moving them up or down.
Enable/Disable QoS: You can check “Enable QoS” to enable QoS functionality for the
WAN port.
Add a rule: Enter all the data required for the rule you wish to set and click Add to save
this rule.
Edit a QoS rule: Select the rule you want to edit and click “Edit”, then enter the detail
form of the QoS rule. Click “Apply” after editing the form and the rule will be saved.
Discipline: Save allows to save the selected Qos discipline without changing the current
rules.
Click „Add‟ To save and apply the new rule.
To Next Page
Loading...
Need help?
General
