When you finish, click ‘Submit’ to save the settings made.
IP Filter Listing
#: Item number.
Enable: Whether the connection is currently active.
Src IP Mask: The source IP address or range of packets to be monitored.
Dest IP Mask: This is the destination subnet IP address.
Protocol: It is the packet protocol type used by the application, select either TCP or UDP
or ICMP
Src port: This Port or Port Ranges defines the port allowed to be used by the
Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is
recommended that this option be configured by an advanced user.
Dest Port: This is the Port or Port Ranges that defines the application.
To Next Page
Loading...
