15
8 Bring up the WLR-1000/2000/3000
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WLR-1000/2000/3000 automatically enters the self-test
phase. During self-test phase, the Power LED will be lit continuously to
indicate that this product is in normal operation.
9 Initial Setup WLR-1000/2000/3000
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in the address bar and press [Enter]
To Next Page
