(service/Internet application) port number from the Internet that will be re-
directed to the above Private IP address host in your LAN.
Comment The description of this setting.
Add Virtual Server Fill in the "Private IP", "Private Port", "Type", “Public Port”
and "Comment" of the setting to be added and then click "Add". Then this Virtual
Server setting will be added into the "Current Virtual Server Table" below.
Remove Virtual Server If you want to remove Virtual Server settings from the
"Current Virtual Server Table", select the Virtual Server settings you want to
remove in the table and then click "Delete Selected". If you want to remove all
Virtual Server settings from the table, just click the "Delete All" button. Click
"Reset" will clear your current selections.
Click <Apply> at the bottom of the screen to save the above configurations.
To Next Page
Loading...
