Sitecom WLR-2001 - Bringing up the WLR-2001; Initial Setup of the WLR-2001

8 Bringing up the WLR-2001
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WLR-2001 automatically enters the self-test phase. During
self-test phase, the Power LED will be lit continuously to indicate that this
product is in normal operation.
9 Initial Setup of the WLR-2001
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in address bar and press [Enter].