Introduction to Component Parts
3-1
Chapter 3
Introduction to Component Parts
3.1 System Configuration
3.1.1 Basic Configuration
a) Main unit (Monitor included): 1 set
b) Probe: super broadband high-density multi-frequency convex probe: 1 pc
3.1.2 Accessories
a) Power cable
b) Potential equalization conductor
c) Dust cover
d) Fuse
【Note】: The specific accessories are subject to the Packing List.
3.1.3 Options
3.1.3.1 Probes:
a) Linear probes
b) Convex probes
c) Micro-convex probes
3.1.3.2 Storage, Print and Record Devices:
a) USB connection devices
b) Printer
3.1.3.3 DICOM3.0 port and software
3.1.3.4 UPS (Uninterrupted Power Supply)
In some areas, there may be sudden power cut due to power supply shortage, causing
system abrupt power-off, loss of data, and thus affect system stability. To avoid such
situation, it is recommended to connect a UPS device, with its power consumption at 500
VA or above, to the system.
To Next Page
Loading...