Preface
III
Preface
To use this system correctly and safely and to ensure a long life, the user should
thoroughly understand the functions, operations, instructions as well as its maintenance.
Please read the information in this manual carefully before using the system.
This system has been designed and manufactured safely for the operators and patients.
However, for ensuring safety and reliability, please pay attention to the following
instructions:
a) This system should be operated only by or under the guidance of a qualified
person.
b) This system,belongs to Type BF Class I according to IEC 60601-1:2005. Please
operate this system by following the safety requirements described in Chapter 1.
c) Do not try to remodel the system. If necessary, contact our agent or us for help.
d) The system has been completely adjusted and fixed before delivery. Do not try to
readjust any adjustable parts that have been well fixed.
e) If any abnormality occurs during operation, turn off the power supply immediately
and contact our agent or us for help.
f) Connect the power cable of the unit to a grounded power socket at ground
impedance of 0.1Ω or less.
g) Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective IEC standards (e.g. IEC 60950 for data
processing equipment and IEC 60601-1 for medical equipment). Furthermore all
configurations shall comply with the valid version of the system standard IEC
60601-1-1. Everybody who connects additional equipment to the signal input part
or signal output part configures a medical system, and is therefore responsible that
the system complies with the requirements of the valid version of the system
standard IEC 60601-1-1. If in doubt, consult the technical service department or
your local representative.
h) The system does not provide special protection functions or measures for use with
high frequency operation equipment. The users should be cautious for such
application.
i) This Operation Manual may be slightly different from that of your equipment due to
system software version, as well as configuration of options and accessories. The
To Next Page
Loading...
