EasyManua.ls Logo

Sixfab Jumpstart 5G - User Manual

Default Icon
54 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Jumpstart 5G
Product Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sixfab Jumpstart 5G and is the answer not in the manual?

Overview

  1. Function Description
  2. Target Markets and Applications
  3. Use Cases and Scenarios
  4. Important Technical Specifications
  5. Raspberry Pi 4 Model B (8GB)
  6. Jumpstart 5G Modem Carrier HAT
  7. Usage Features
  8. Getting Started
  9. Establishing a 5G Connection
  10. SSH Login
  11. Hardware Features
  12. Software Features
  13. Maintenance Features
  14. Warnings
  15. Warranty and Liability Disclaimers
  16. Additional Disclaimers
  17. Compliance and Regulatory Information

The Sixfab Jumpstart 5G is an IoT computer based on the Raspberry Pi 4, designed to provide high-speed 5G connectivity for various IoT applications. It integrates a Quectel RM502Q-AE modem, a 5G NR Sub-6GHz variant, and features a patent-pending Sixfab-designed internal antenna for optimal performance at Sub-6 frequency bands. The device is housed in a custom plastic enclosure with a specially designed thermal system to ensure optimal performance.

Function Description:

The Jumpstart 5G serves as a comprehensive platform for exploring and harnessing the capabilities of 5G technology in IoT/eMBB (enhanced Mobile Broadband) applications. It is particularly suitable for industries and sectors that require high-speed and reliable connectivity for their IoT projects.

Target Markets and Applications:

  • Network Operators: Acts as a valuable testing and evaluation tool to assess 5G network performance, experiment with configurations, and fine-tune offerings.
  • IoT Solution Providers: Offers a platform for prototyping and validating 5G-enabled IoT solutions, demonstrating their value to potential customers and partners.
  • IoT Developers and Enthusiasts: Empowers developers to create innovative applications and solutions leveraging high-speed, low-latency 5G connectivity.

Use Cases and Scenarios:

  • IoT Prototyping and Testing: Facilitates prototyping and testing of new IoT concepts, ensuring compatibility with 5G networks and exploring emerging technologies like edge computing and AI.
  • Industrial IoT: Enables the development of industrial IoT applications for real-time monitoring, predictive maintenance, and remote asset management in sectors such as manufacturing, logistics, and utilities.
  • Smart City Solutions: Supports the exploration and development of smart city applications leveraging 5G connectivity for smart transportation systems, intelligent energy management, and efficient public services.
  • Remote Monitoring and Surveillance: Allows for building solutions for real-time video streaming, remote control, and situational awareness across various industries, including security, agriculture, and infrastructure.
  • High-Speed Data Transfer: Ideal for testing and optimizing applications requiring high-speed data transfer, such as multimedia streaming, cloud-based services, and large-scale data analytics.
  • Digital Signage: Powers 5G-enabled digital signage solutions for dynamic and interactive content delivery in retail, hospitality, and transportation, enabling real-time content updates, remote management, and personalized customer experiences.

Important Technical Specifications:

Raspberry Pi 4 Model B (8GB):

  • Processor: Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.8GHz.
  • RAM: 8GB LPDDR4-3200 SDRAM.
  • Wireless Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE.
  • Ethernet: Gigabit Ethernet.
  • USB Ports: 2 USB 3.0 ports; 2 USB 2.0 ports.
  • Video Output: 2 micro-HDMI ports.
  • Display Interface: 2-lane MIPI DSI display port.
  • Camera Interface: 2-lane MIPI CSI camera port.
  • Audio/Video: 4-pole stereo audio and composite video port.
  • Storage: Micro-SD card slot for loading operating system and data storage.

Jumpstart 5G Modem Carrier HAT:

  • 5G Module: Quectel M.2 5G Sub-6 RM502Q-AE module.
  • Supported Frequency Bands and Modes (5G NR):
    • 3GPP Release 15 NSA/SA operation, Sub-6 GHz.
    • NSA: nB2/B41/B66, DC_2A_n41A / DC_66A_n41A.
    • SA: n41/n77/n78.
  • Maximum Data Rates and Throughput:
    • 5G SA Sub-6: Downlink 4.2 Gbps; Uplink 450 Mbps.
    • 5G NSA Sub-6: Downlink 5.0 Gbps; Uplink 600/650 Mbps.
  • Network Protocols: TCP/UDP/FTP/HTTP/HTTPS/PING/SMS.
  • Region: Global.
  • Dimensions: 51.5 mm (height) x 104.36 mm (width) x 63.4 mm (depth).
  • Weight: 207.5 grams (total product).
  • Internal Antenna: Patent-pending Sixfab designed 4X MIMO Micro-strip antenna, operating over 5G NR SA bands (n41, n77, n78, n71) and NSA bands (n41 with DC_2A_n41A, DC_66A_n41A combos). Connections are made via MHF4 connectors and custom-made MHF4 cables.
    • Return Loss: Typically below -14 dB for n41, n77, n78 bands.
    • VSWR: Typically below 1.32:1 for n41, n77, n78 bands.
    • Ports Isolations: Typically below -20 dB for n41, n77, n78 bands.
    • Gains/Efficiencies/Polarizations:
      • N41: 3.2 dBi, >65% efficiency, Linear polarization.
      • N77: 1.99 dBi, >77% efficiency, Linear polarization.
      • N78: 2.75 dBi, >82% efficiency, Linear polarization.
      • N71: 3.03 dBi, >78% efficiency, Linear polarization.
  • USB Bridge: Connects the 5G module to the Raspberry Pi's USB 3.0 port, featuring EMI/EMC filtering components for faster and more efficient data transmission.

Usage Features:

Getting Started:

  • Pre-configured OS: The device comes with a pre-configured Raspberry Pi OS, eliminating the need for manual OS installation.
  • Driver Support: The cellular module has built-in support in the Linux kernel and is automatically recognized; no additional drivers are required.
  • Communication Tools: atcom and minicom are pre-installed for sending AT commands to the cellular module.

Establishing a 5G Connection:

  1. Unplug USB 3.0 Bridge Connector.
  2. Remove Top Cover: Push to remove the top cover.
  3. Insert SIM Card: Plug in a nano-type SIM Card (4FF), paying attention to corner marking.
  4. Assemble Top Cover: Align the bottom edge first when reassembling.
  5. Connect USB 3.0 Bridge Connector.
  6. Power Up: Plug in a micro HDMI and keyboard/mouse to access the desktop GUI, then connect two power adapters to the Type-C connectors.
  7. Set APN: Use the atcom AT+CGDCONT=1,"IPV4V6","YOUR_APN" command in the terminal to set the Access Point Name (APN).
  8. Reset Modem: Use atcom AT+CFUN=1,1 to reset the modem. Wait 50 seconds for modem function and a few minutes for network registration.
  9. Test Connection: Verify internet activity using ifconfig or ipaddr for the usbX interface and test connectivity with ping -I usb0 sixfab.com -c 5.

SSH Login:

  • Credentials: Username: pi, Password: raspberry. Users are advised to change these default credentials for security.

Hardware Features:

  • LED Indicators:
    • Power LED: Indicates HAT power status, controllable via GPIO19.
    • Status LED: Indicates RF function of the module (on when RF function is on, off when SIM is not powered or RF function is disabled).
    • User LED: Programmable user-LED, controllable from GPIO21 of Raspberry Pi for debugging or custom functions.
  • User Button: Programmable button connected to GPIO20, reads HIGH by default.

Software Features:

  • Network Configuration: AT commands allow disabling 5G NR (SA/NSA), configuring network search modes (AT+QNWPREFCFG), and defining PDP contexts (AT+CGDCONT).
  • Network Diagnostics: AT commands like AT+QENG (Query Primary Serving Cell and Neighbour Cell Information) and AT+QNWINFO (Query Network Information) provide detailed network status, including cell ID, signal strength (RSRP, RSRQ, SINR), band, and bandwidth. AT+C5GREG queries 5GS Network Registration Status. AT+COPS allows operator selection.

Maintenance Features:

Warnings:

  • Power Supply: Use only official Raspberry Pi power supplies or Sixfab power adapters to protect electronics and ensure optimal performance.
  • Overheating: Do not block device airflow. The cooling fan automatically adjusts speed; reprogramming may be needed if the OS image or script is overwritten.
  • ESD Protection: The device contains sensitive electronic circuitry (ESD). Handle with proper ESD protection to prevent damage.
  • Antenna Placement: The antenna is located at the top; avoid placing the device upside down or near objects that could affect the signal.
  • SIM Card Removal: Use the included Sixfab Jumpstart 5G SIM removal tool to eject the SIM card to prevent slot damage.

Warranty and Liability Disclaimers:

  • Warranty Period: Sixfab, Inc. warrants the product to be free from defects in materials and workmanship for 180 days from the date of purchase.
  • Warranty Limitations: Does not cover damage from accident, misuse, abuse, improper installation, liquid contact, acts of nature, direct sunlight exposure, or modifications (soldering/desoldering, component changes, thermal element changes/removals, or repairs by unauthorized personnel).
  • Disclaimer of Liability: Sixfab, Inc. is not liable for incidental, consequential, or special damages arising from product use.
  • Limitations on Liability: Maximum liability for damages caused by defects is limited to the product's purchase price.

Additional Disclaimers:

  • Documentation Accuracy: Sixfab, Inc. makes no warranty regarding the accuracy or completeness of provided information; documentation is updated regularly, and offline versions may be outdated.
  • Third-Party Software/Hardware: Sixfab, Inc. is not liable for damages arising from the use of third-party software or hardware with Jumpstart 5G.
  • Illegal/Unauthorized Use: Sixfab, Inc. is not liable for damages arising from illegal or unauthorized use of Jumpstart 5G.
  • Environmental Damage: Users are responsible for disposing of Jumpstart 5G in accordance with environmental regulations, as it may contain hazardous materials.
  • Third-Party Losses: Sixfab, Inc. is not liable for damages causing loss to any third party.
  • Indemnification: Users agree to indemnify Sixfab, Inc. against claims, losses, damages, liabilities, costs, and expenses arising from their use of Jumpstart 5G.
  • Governing Law: Warranty and disputes are governed by California state laws.

Compliance and Regulatory Information:

  • FCC: Complies with FCC Part 15 Subpart B, Part 22, Part 24, Part 27, Part 90 Subpart R & S, Part 96. FCC ID: 2BAWK-SCP1009.
  • CE/UKCA: Designed to meet radio equipment directive 2014/53/EU(RED) requirements. CE Notified Number: 2280.
  • Industry Canada (IC): Complies with IC license-exempt RSSs. IC ID: 30652-SCP1009.
  • IEC: Designed to be compatible with IECEE CB scheme Standard tests (still under certification).
  • PTCRB: Regulatory tests completed with 5G NR SA and NSA bands configurations.
  • GCF: Regulatory tests completed with 5G NR SA and NSA bands configurations.

Sixfab Jumpstart 5G Specifications

General IconGeneral
BrandSixfab
ModelJumpstart 5G
CategoryRemote Starter
LanguageEnglish