1. Product Overview 5
1.1 Description of Sixfab Jumpstart 5G 5
1.2 Target Markets and Applications: 5
1.3 Use Cases and Scenarios: 6
2. Getting Started 7
2.1 Overview of the operating system requirements for the kit 7
2.2 Compatibility with Raspberry Pi OS, necessary drivers, and libraries 7
2.3 Establishing a 5G Connection 8
1. Unplug the USB 3.0 Bridge Connector 8
2. Push to remove top cover 9
3. Plug in the nano type SIM Card (4FF) 9
4. Assemble the top cover 10
5. Connect USB 3.0 Bridge Connector 10
6. Set only your APN to connect the device to network 11
7. Test Cellular Internet Connection 12
2.4 Warnings 13
3. Hardware Specifications 14
3.1 Jumpstart 5G Modem Carrier HAT 14
3.1.2 Pinout 14
3.1.3 Pin Descriptions 15
3.1.4 Layout 16
3.1.5 LEDs 17
3.1.6 Buttons 18
3.1.7 5G Module 19
3.2 Supported frequency bands and modes 19
3.3 Maximum data rates and throughput 20
3.4 Network Protocols 20
3.5 Region 20
3.6 Dimensions 21
3.7 Weight 21
3.8 Raspberry Pi 22
3.9 Power 23
3.10 USB Bridge 23
3.11 Detailed specifications of the internal Antenna 24
3.11.1 Return Loss 25
3.11.2 VSWR 25
3.11.3 Ports Isolations 26
3.11.4 Gains/Efficiencies/Polarizations 26
3.11.5 Propagation Patterns 27
Copyright © 2023, Sixfab Inc 3
To Next Page
Loading...