Instructions for ensuring safe transport, handling and
storage:
Transport in a box. Ensure that the tool does not move in
the shipping box. The tool must be protected against a fall
from 1 meter by packaging material.
The procedure to be followed in the event of a crash,
malfunction, blockage:
If any defect or damage is found, the problem must be
solved first. Do not handle the defective tool in any way and
contact your dealer immediately.
EN
10
Manufacturer and Distributor:
TorriaCars s.r.o., Nádražní 12, Žandov, 471 07, Czech Republic
General description: Hydraulic jack
Description of intended use: Lifting of vehicles
www.torriacars.cz
Mobile Hydraulic Floor Jack 2.5 t Low-profile SX JACK 2,5T
To Next Page
Loading...