Maintenance
Lubrication
Lubricate the joints at regular intervals.
EN
9
Corrosion prevention
When the jack is not in operation, place the piston in the down
position.
Avoid moisture. In case of contact with moisture, wipe the jack
dry and lubricate all parts with oil.
Unacceptable uses
It is forbidden to use the tool in a way other than that
described in this instruction manual.
Other risks that remain despite the measures taken
to ensure safety:
Despite every effort to describe possible risks, it is not
possible to mention in the manual all other dangers that arise
from handling the tool. Therefore, always follow the exact
instructions for use and act rationally when working with the
tool.
To Next Page
Loading...
